Ghost Autowatch Immobiliser Techniques To Simplify Your Everyday Lifethe Only Ghost Autowatch Immobiliser Trick That Every Person Must Be Able To

Autowatch Ghost Immobiliser

Ghost Immobiliser is a renowned product that protects your vehicle from key-cloning hacking and theft. This TASSA verified system remains undetectable to thieves and prevents them from starting your car.

This silent device makes use of buttons on your car's steering wheel as well as the doors and the centre console to permit you to create a unique and changeable PIN code sequence up to 20 characters. The code must be entered before the car can begin.

Easy to install

It is more essential than ever to protect your vehicle. With car crime increasing, and cloning devices easily available, it's vital to protect your vehicle. Our Autowatch Ghost immobiliser provides a secure, efficient and affordable solution to guard against key-cloning and car theft. The device is almost indestructible to thieves and operates via buttons on the steering wheel or door panels. This allows customers to create a unique sequence of disarming like a credit card that must be entered before the vehicle can be started or driven away. This makes the system virtually impossible to identify and is also unaffected by jamming or spoofing devices like those used by other systems available.

The installation of the Ghost unit is a highly-specialized procedure and should only be completed by an authorized installer. The unit is carefully integrated into your vehicle's network of CAN buses which ensures it can communicate directly to the ECU.  how much is a ghost immobiliser  can be installed without affecting factory settings, and it is impossible for a thief to evade the system with signal boosters.

When the Ghost is fitted the new and improved disarm sequence must be inputted to start your vehicle. Press the service button five times in a matter of 2 seconds, but make sure you don't hold it down for too long. The system will then blink twice to signal that Transport Mode has been activated. This feature is great for classic, sports or high-end vehicles that require to have their security system temporarily disabled during transport or servicing.

After Transport Mode has been activated, the immobiliser will be disabled and cannot be reactivated by entering your PIN code again. This feature is perfect for those who want to store their cars during the winter months to protect them from being stolen or to avoid paying higher insurance premiums.

No key-fobs or LED indications to indicate its location

The Ghost immobiliser protects your car from theft by pressing buttons on the dashboard or steering wheel. You can enter a pin number without being noticed before you start the engine. It wards off attacks using signal relays, ECU swapping and key cloning. It also connects to a mobile application to arm or disarm remotely. It's easy to install and can be fitted into a wide range of vehicles. It's also incredibly stealthy and can be concealed in a difficult-to-find location, such as behind the dashboard or in the trim of the steering wheel.

It's an excellent option for high-performance vehicles since it can shut off the ignition system of your vehicle if the wrong pin code is entered, thus preventing thieves from driving off with your pride and joy. The device can send an alert to an iPhone if the vehicle is left unattended when in public. This provides peace of mind while away from your vehicle.

Like other immobilisers Ghost does not require additional fobs or LEDs It can be concealed easily in a hard-to-reach area inside your vehicle. It communicates directly with the vehicle's CAN data network, making it highly resistant to detection. It doesn't emit radio signals so it is undetectable by signal jammers or RF scanners.

It's made to be tamperproof and weatherproof, which means it can withstand extreme temperatures. It is also unaffected by tampering with by cutting wires or dismantling the device. Furthermore, it doesn't require any circuit cutting to function, so it's undetectable to organized gangs of thieves that utilize diagnostics devices to detect fitted security systems. It is not affected by professional diagnostic equipment that examines the CAN data for the presence or absence of a security system.

No circuit cuts

Without any LED indicators or key fobs that can reveal its location, the ghost device is hidden inside your vehicle, underneath the dashboard or steering wheel and makes use of buttons in your car to create an unique PIN code sequence that must be entered before the engine can start. This means that even if a person who stole your keys does have them, they are unable to drive the vehicle away since they do not know the correct PIN code sequence. The device doesn't transmit radio signals meaning that organised criminal gangs that use diagnostics reading devices will not be able to detect the device.

This innovative immobiliser is TASSA approved and could help lower your insurance premiums, especially for vehicles that have been customized by their owners. It also prevents key cloning theft and ECU swapping meaning that the only way for a thief can steal your pride and joy is to remove it.

Because the system does not utilize the factory key fobs or dashboard buttons, it is an entirely silent device that communicates with your ECU through the CAN data circuit, which operates in complete silence and gives no indication that it's fitted. This means that a burglar can't replace the ECU or install new key fobs in order to get your car to start.

If you forget your PIN code our engineers will have provided you with an emergency reset option for the device that allows you to enter 'service mode'. This will allow the technician or dealer to temporarily start and drive your vehicle which allows them to complete maintenance work, MOTs or valet parking without needing to enter the PIN code a second time. After the technician has done or you have collected the vehicle and returned it to the dealer, enter the PIN to exit service mode.

No radio signals

Contrary to many other car security systems the Ghost immobiliser does not rely on an alarm system or key fobs to stop vehicles from starting. Instead, it communicates with the vehicle's ECU and CAN data circuit to prevent the engine from starting. It is a discreet solution, which is not affected by key-cloning techniques or radio frequency scanning techniques used by thieves to get around security devices. It can also be paired with tracking systems to improve the security of your vehicle. It will also alert you to any attempted tampering or theft.

The Autowatch Ghost is a TASSA-certified device that is insurance approved and provides a superior level of security against key hacking, copying, and even theft. It is controlled through a mobile app and is secured with encryption to protect. It comes with a secure emergency PIN override. It's a reliable, discreet and cost-effective way to shield your car from theft.

However, the Ghost is not without its issues. Many users have difficulty entering the correct disarming sequence. The device requires input via buttons that are already on your vehicle, like the ones on the steering column or console. Users might find this difficult to remember or get wrong particularly when the device is being used for the first time. It is best to read the instruction manual that comes with the device and then practice the disarming procedure prior to driving.

Another issue is that certain vehicles have issues with the CAN data connection, which can impact the functioning of the Ghost. This can be caused either due to malfunctioning sensors or an abrasive OBD connector. It is recommended to test the system before attempting to use it in case there are any issues with the CAN connection.

Easy to change  ghost immobiliser  is an excellent product that has enjoyed a great reception on the market. However changing the pin code can be a bit confusing. The device is pre-programmed via the installer when it's fitted however, there are times when customers may want to change this due to a variety of reasons, such as they'd like a different button to disarm the device and they don't want the installer to know or they just simply don't like their current pin number. The good news is that the change over to a new pin number is incredibly easy. Follow the simple instructions below to find out how.

Be aware that you will have to turn on the ignition but DO NOT start your vehicle! This process only takes several minutes. The vehicle will then resume normal operation.